One of Hottest for Mug Thermos - Simple and fashionable bullet head insulation pot with lifting rope – Jupeng

Product Description

1 【 about determination of holding time 】

Real tailless vacuum technology, cool and heat preservation, super thermal insulation performance, proud group “Cup” test environment: room temperature: 20 degrees, injection water temperature: boiling water 100 degrees, test tool: industrial water thermometer for 6 hours, temperature measurement of 70 degrees plus or minus 5 degrees; 12 hour temperature measurement: 50 degrees plus or minus 5 degrees; (measurement season: the room temperature in Shanghai in October is 20 ℃), good products will have confidence. Please test them according to the above standards. There is no need to worry about the thermal insulation performance!

2 【 about smell 】

Our products are not inventory goods. Please rest assured that the products are directly boxed and sold after production. The thermos cup needs to be stretched and formed by the forming machine in the vacuum pumping process, which will inevitably leave some smell of machine and spray paint. This is a normal phenomenon. After the cup is received, it can be cleaned several times or soaked in boiling water for several hours. The smell can be eliminated while testing the thermal insulation characteristics, Please don’t worry too much.

3 【 about water leakage 】

Our thermos cup adopts the latest European screw cup plug design and embedded gasket sealing method. The upper and lower double insurance will not leak in the design. Individual users reflect the water leakage. After our Wangwang and telephone confirmation, we learned that it was caused by the user’s misunderstanding in use. We apologize for not explaining this clearly in the product description page; now explain it As follows: “water leakage” mostly has two situations

The first is that heat is radiated into the cup cover through the cup plug. There is a temperature difference inside and outside the cup cover, resulting in condensation and steam liquefaction. This “water leakage” usually occurs after opening the cup cover. In fact, this is not the water leakage of the cup plug. Open the cup cover and invert the cup body, and you can test it yourself. There is no need to worry.

Second, after pouring water for drinking and tightening the cup plug, there is still very little water left in the gap between the cup plug switch and the cup plug gasket. At this time, the inverted cup body has water flowing out and is mistaken for water leakage; the detection method is to unscrew the cup plug and throw away the residual water in the cup plug. After tightening, the inverted cup body should be free of water leakage. Please test it by yourself.

usage method:

1. Wash the inner tank before initial use.

2. First wash the inner tank with a small amount of hot water or ice water (do not use steel ball for cleaning), then pour it out, and then refill it with boiled water or ice water to ensure better thermal insulation effect

3. After each use, please clean and keep dry.

4. It is not suitable to store carbonic acid drinks in the cup for a long time, so as to prolong the service life of the thermos cup.

5. Do not get close to the heat source, and do not hit violently.

6. Keep out of the reach of children to avoid scalding.

[precautions]:

(1) Please pay attention to avoid scalding

A. Prevent children from getting it at will

B. Do not tilt the bottle quickly when drinking

C. Do not pour too much into the drink to avoid spilling the drink when the switch is turned on

D. Do not use it while driving

E. Do not open the switch and cover when the work in process is tilted or the cover is close to the side face

F. Do not vibrate or shake violently when hot drinks are contained in the product

(2) . please do not boil the cover and switch to avoid deformation

(3) Please do not immerse the whole cup in water during cleaning

Product Parameter

Product Image

Certifications

Factory Tour

click here to know more about us

Exhibition